Check list of Things you will need to Paint
The paint itself
Brushes
Roller Frame and Covers and perhaps an extention pole
Paint Tray and perhaps a Tray liner
Handy Bucket
Drop Cloths / Plastic / Tape / Paper Rolls
Preparing
To get a great-looking finish coat and the beautiful, long-lasting results you expect, take the time to ensure that the surface to be painted is clean, dry and smooth and coated with the correct primer. Our neighborhood paint experts can provide additional advice about which primer is right for your project. And remember, we also tell you what all the tools are that you’ll need for surface preparation – such as ladders, wire brushes, paint scrapers, putty knives, wood filler and spackling paste – to prepare a surface for painting.
Surface Preparation
Preparation. It’s the key to good-looking, long-lasting results. A properly prepared surface is clean, solid and dry, without cracks and imperfections.
Warning! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call (in the U.S.) the National Lead Information Center at 1-800-424-LEAD or contact your local health authority.
Bare Wood
- Easy-to-clean latex semi-gloss or gloss would be the best choice for the finished coat.
- Fill nail holes, joints and cracks with patching paste.
- Sand smooth and remove sanding dust with a tack cloth.
- Prime all bare wood and patched areas with a primer.
New Plaster Walls
- Latex is an excellent topcoat choice because it’s easy to work with.
- These must be clean and completely cured.
- Textured or swirl types and soft, porous or powdery plaster must be: – Treated with a solution of one pint household vinegar in one gallon of water. – Repeat the treatment until the surface is hard. – Rinse with plain water. – Let dry and apply primer.
New Drywall
- Latex is your best choice here.
- Panels must be securely nailed or glued in place.
- All panel joints must be taped and filled before painting.
- When joint cement and/or patching materials are thoroughly dry, sand smooth, wipe away dust, then prime.
Wallpaper
- Always remove wallpaper before painting. Use a chemical wallpaper remover or rent a steamer, if necessary.
- Once the paper is removed, wash off old adhesive. Rinse with water and allow the wall to dry before priming.
Previously Painted Surfaces
- Wash off dirt, grease, soap and oil buildup with the appropriate cleaner. Rinse thoroughly.
- Remove loose paint and powdery substances.
- Patch holes and cracks with spackling or patching compound. Allow to dry, then sand smooth.
- For glossy or nonporous surfaces, lightly sand to a dull finish or use an abrasive cleanser.
- Remove sanding dust or cleanser residue.
- Make sure to prime all bare areas prior to applying topcoat. (Avoid “spot priming,” which will result in a non-uniform appearance between primed and non-primed areas.)
Masonry, Concrete, Cement, Block
- All new surfaces must be cured according to the supplier’s recommendations- usually about 30 days.
- Remove all form release and curing agents.
- Rough surfaces can be filled to provide a smooth surface.
- If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with masonry primer.
Choosing A Primer
We make it easy to get the right primer for any surface you want to paint. To get a great-looking finish coat and the beautiful, long-lasting results you expect, be sure to properly apply primer to the surfaces you plan to paint.
Primers are formulated to solve typical painting problems while helping to make your finish coat smooth and uniform:
Achieve a smooth, professional finish
- Block stains, marks and odors
- Assure adhesion
- Speed topcoating
- Prevent peeling
- Attain the truest paint color in the fewest coats
- Improve touch-up performance of the topcoat
Premium Wall & Wood Primer – Premium quality primer for the smoothest finish
Multi-Purpose Latex Primer – General purpose whole-house primer for multiple surfaces
Drywall Primer – Seals new drywall and previously painted walls for a consistent finish
Pre-Wallcovering Primer – Primes, seals and sizes in one coat
Adhesion Primer – Tightly bonds to slick and glossy surfaces
White Pigmented Shellac Primer – Highest performing primer for sealing out the toughest stains and odors in one coat
Concrete & Masonry Primer – Seals and adheres to concrete, brick, stucco and plaster
Our paint expert can provide additional advice about which primer is right for your project.
If you want any help orÃÂ just want a quote, call us at 714-402-3132 orÃÂ fill in the form below.
